一个abaqus consolidation的问题 [复制链接]

个位大哥,
我正在analyse 一个由 ARUL BRITTO 基于abaqus 的 consolidation 问题. 我已经付贴上BRITTO的解释. 当我用abaqus执行时， 出现erorr， ***ERROR: USER SUBROUTINE UFIELD IS MISSING

我也付上inp文件. 请问是那里出错了?

谢谢

补上inp file.

     还没入门呢

解决了

各位大虾，我是一个ABAQUS新手，现在出现了 一个很严重的问题，望大家指教。
我买了一本教材，针对的是ABAQUS6.7.1的，而我用的是6.8.1，结果我教材里面的CAE例子在我的软件里面运行的时候，出现了以下的错误提示，是怎么回事啊。
Problem during linking - Abaqus/Standard User Subroutines.   This error may be due to a mismatch in the Abaqus user subroutine arguments.   These arguments sometimes change from release to release, so user subroutines   used with a previous version of Abaqus may need to be adjusted.
请大虾们赐教。

log文件里面的信息是这样的：
Abaqus JOB Job-1
Abaqus Version 6.8-1
Begin Compiling Abaqus/Standard User Subroutines
04/30/10 16:23:56
End Compiling Abaqus/Standard User Subroutines
04/30/10 16:23:57
Begin Linking Abaqus/Standard User Subroutines
04/30/10 16:23:57
LINK : fatal error LNK1104: 无法打开文件“OLDNAMES.LIB”
Abaqus Error: Problem during linking - Abaqus/Standard User Subroutines.
  This error may be due to a mismatch in the Abaqus user subroutine arguments.
  These arguments sometimes change from release to release, so user subroutines
  used with a previous version of Abaqus may need to be adjusted.
Abaqus/Analysis exited with errors

我的问题与楼上相似，只不过提示是：
LINK : fatal error LNK1104: cannot open file 'user32.lib'
Abaqus Error: Problem during linking - Abaqus/Standard User Subroutines.
  This error may be due to a mismatch in the Abaqus user subroutine arguments.
  These arguments sometimes change from release to release, so user subroutines
  used with a previous release of Abaqus may need to be adjusted.
Abaqus/Analysis exited with errors