地震工程模拟计算平台——OpenSees [复制链接]

OpenSees的全称是Open System for Earthquake Engineering Simulation（地震 uaha)W;'9  
工程模拟的开放体系）。它是由美国国家自然科学基金（NSF）资助、西部大学联 [-R[rF  
盟“太平洋地震工程研究中心”（Pacific Earthquake Engineering Research Center， 9]I{GyH  
简称PEER）主导、加州大学伯克利分校为主研发而成的、用于结构和岩土方面地 +\>op,_9I  
震反应模拟的一个较为全面且不断发展的开放的程序软件体系。 mCQ:<#  
OpenSees程序自1999年正式推出以来，已广泛用于太平洋地震工程研究中心 Q>

L.  
和美国其它一些大学和科研机构的科研项目中，较好的模拟了包括钢筋混凝土结 }%0X7'  
构、桥梁、岩土工程在内众多的实际工程和振动台试验项目，证明其具有较 \|Y_,fi  
好的非线性数值模拟精度。该程序正在引起世界各国结构工程领域众多研究人员 0J;Qpi!u2v  
的关注和重视，而在国内也开始有少数学校开展了一些初步的学习和相关的研究 )X8N|W>vh  
工作。 9LOq*0L_:  
|jcIn[)=  
The Open System for Earthquake Engineering Simulation Y&$puiH-j  
The Open System for Earthquake Engineering Simulation (OpenSees) is a software framework for simulating the seismic response of structural and geotechnical systems. OpenSees has been developed as the computational platform for research in performance-based earthquake engineering at the Pacific Earthquake Engineering Research Center. OpenSees is also the simulation component for the NEESit since 2004. 'GLpSWL+*  
y%<CkgZS  
Capabilities U8<C
4  
OpenSees has advanced capabilities for modeling and analyzing the nonlinear response of systems using a wide range of material models, elements, and solution algorithms. The software is designed for parallel computing to allow scalable simulations on high-end computers or for parameter studies. NA#,q 8  
s/P+?8'9  
Modeling CH5>u  
OpenSees providing beam-column elements and continuum elements for structural and geotechnical models. A wide range of uniaxial materials and section models are available for beam-columns. n6C!5zq7U  
]Z*B17//  
Analysis ]?Q<lMG  
Nonlinear analysis requires a wide range of algorithms and solution methods. OpenSees provides nonlinear static and dynamic methods, equation solvers, and methods for handling constraints. <s'0<e!./t  
>g{b'Xx  
Development Process zV"'-iP  
OpenSees is open-source. This website provides information about the software architecture, access to the source code, and the development process. The open-source movement allows earthquake engineering researchers and users to build upon each others accomplishments using OpenSees as community-based software. vxrqUjK7  
<." @H<-`*  
Mh}vr%0;)  

我也在学习它的c++原代码，基本上算掌握了。但还没有真正改造过它的原代码。 C)%qs]  
实际上用TCL建模仍有很大的局限性，从面向科研的角度看，还是要掌握c++原代码。 8,&Y\b`..  
继续学习中........

opensees学习交流群:108677474，欢迎大家加入

英文的，呵呵还是很有用的

要学习！！！！！！！！！

好东西 !!谢谢了

唉，只会Fortran

什么是TCL建模，而且请问一下，在岩土方面是基于什么原理模拟的呢？

有人有着软件没有？上传共享一下撒

还以为是软件，不厚道

用于结构和岩土方面地震反应模拟的一个较为全面且不断发展的开放的程序软件体系，有原代码可以使用？？

大侠，听说您把源代码搞懂了，很佩服，能给点经验吗？我的qq: 745606860.恳请加大侠为好友