With conventional force-based seismic design, the most important information for the structural {FTqu.
engineer has been the effective peak ground acceleration. This number is comparatively ws^ np
insignificant in displacement-based or performance-based seismic design, where the key data are xn|(9#1o
peak spectral response displacement, and the “corner” period at which this occurs. There appears #cLBQJq
to be a disagreement between seismologists on opposite sides of the Atlantic about these data, BFW&2
which the structural engineer views with concern, since ductile structural response will often be in 4ss4kp_>
this region of the corner period. Dependable information on the reduction of displacement }4S6Xe
response with damping or ductility is also needed for design approaches utilizing secant stiffness ;6hOx(>`=
characterization. Other areas needing clarification include the issue of how to develop [PKR2UEe]
accelerograms for time-history analysis compatible with the design seismicity using an acceptably >)Tqt!?
small number of accelerograms, and how to reconcile the statistical nature of seismicity 5rUdv}.
characterization with the structural engineer’s preference for deterministic analysis. There is some 4nz 35BLr
evidence that a consequence of this is invalid averaging of response characteristics by structural *_g$MI
engineers.