sel cable id=2 begin 24.158 1.6 22.732 end 24.990 1.6 23.976 nseg 3
sel cable id=3 begin 21.109 1.6 18.162 end 24.158 1.6 22.732 nseg 5
sel cable id=2 begin 15.842 1.6 22.732 end 15.510 1.6 23.976 nseg 3
sel cable id=3 begin 18.891 1.6 18.162 end 15.842 1.6 22.732 nseg 5
sel cable id=2 prop xcarea=7.85e-3 emod=200e9 yTens=310e6 gr_k=6e5 gr_coh=1e10 gr_per=0.41 gr_fric 20
sel cable id=3 prop xcarea=7.85e-3 emod=200e9 yTens=310e6 gr_k=6e-5 gr_coh=1e10 gr_per=0.41 gr_fric 20
我不是用坐标进行锚索支护我在ansys里进行了分组，程序改为 sel cable id=2 range group3 nseg3对吗？请问nseg什
